Filter
Top Products
System & Station
Program *41 for DK424 – T1 Assignment Series (Part 1)
Strata DK Programming 5/99 3-123
System & Station
Program *41-2 – T1 Channel Assignments
Initialized Default:
1 = Loop Start
Important! See Program 17 for other Tie/DID assignments; see Program
*
17 and Program
*
09
for other DID assignments.
Processor Line Range
RCTUBA/BB 001~048
RCTUC/D 001~144
RCTUE/F 001~200
RDTU:___________ Slot:___________ RDTU:___________ Slot:___________ RDTU:___________ Slot:___________
RDTU Channel No. Line Type RDTU Channel No. Line Type RDTU Channel No. Line Type
111
222
333
444
555
666
777
888
999
10 10 10
11 11 11
12 12 12
13 13 13
14 14 14
15 15 15
16 16 16
17 17 17
18 18 18
19 19 19
20 20 20
21 21 21
22 22 22
23 23 23
24 24 24
More channels
or...
Run Program 91-2
SELECT = 2
Enter the RDTU being programmed (1~8).
Enter the RDTU channel number (01~24)
to be assigned a line type.
To add a port range, enter XXX
XXX
(low port
high port).
Enter the line type to be assigned to the RDTU channel:
See Programs 17 and 71 for other Tie/DID assignments;.
See Program *17 and Program *09 for other DID assignments.
1 = Loop Start (initialized) 4 = Tie (Wink)
2 = Ground Start 5 = DID (immediate)
3 = Tie (immediate) 6 = DID (Wink)