Filter
Top Products
Least Cost Routing
Program 54 – LCR Route Definition Tables
5-18 Strata DK Programming 5/99
Route Definition Number
Route definitions define the CO line group and modified digit tables used for each LCR Plan. See
the legend for the number of route definition numbers for your processor.
CO Line Group (assigned in Program 16)
Each line group represents a type of service, e.g., special common carrier, foreign exchange, local
line group, etc. Program 40 denies incoming and outgoing line access to stations, including LCR
access. Program 41 allows line access to stations using LCR only for outgoing calls when enabled.
Modified Digits Table
Refer to Programs 55-0, 55-1 and 55-2. The system handles line groups differently, according to
which modified digits table was assigned in Program 54.
HMIS Example
The following table gives you an example of how you might set up Program 54 for the HMIS:
LCR
Plan
01~16
Route
Definition #
(see legend
above)
Program 16
CO Line
Group (see
legend above)
Program 55
Modified Digits
(see legend above)
LCR
Plan
01~16
Route
Definition #
(see legend
above)
Program 16
CO Line
Group (see
legend above)
Program 55
Modified Digits
(see legend above)
01 1 01 01
Local
02 1 01 01
911
08 1 01 01
Long Distance