Filter
Top Products
System & Station
Program 35 – Station Class of Service
Strata DK Programming 5/99 3-99
System & Station
LED 17: Continuous DTMF Tones Off
2000-series digital telephones can send DTMF tones for as long as station users press their buttons
(80 msec. minimum). This feature can be disabled (LED 17 ON). If it is disabled, DTMF tones
sent by these telephones will be either 80 or 160 milliseconds depending on the selection made
with Program 10-1, LED 04 and Program 10-2, LED 06.
Note PDKU1 does not support continuous DTMF tones on 2000-series digital telephones.
LED 16: No Call Forward/No Answer on Handsfree Answerback
When enabled (LED 16 ON), a Handsfree Answerback call to an idle station in the Call Forward
No-Answer or Call Forward-Busy/No Answer mode is not forwarded. If the system is
Programmed for Voice first (Program 10-1 and 10-2, LED 01 OFF), Voice Announce calls do not
Call Forward No-Answer; however, calls will call forward busy. This prevents the call from being
forwarded 8-60 seconds after the called party has been talking in the Handsfree Answerback
mode.
Outside calls and busy internal calls to the station continue to forward with this feature set. If the
system is set for Tone First, calls will call forward on Busy and No Answer.
Notes
● The caller can press the RING Soft Key on digital LCD telephones or press on digital or
electronic telephones to activate Call Forward on Voice Announce calls.
● OCA calls do not Call Forward No Answer in any case.
LED 15
Not used at this time.
LEDs 13 and 14: Toll Restriction After Answer
These two LEDs determine whether or not a toll restricted telephone user is allowed to use one
touch speed dial buttons after answering an incoming CO line call. LED 13 and 14 should be
turned ON for Toll Restricted Telephones that must answer incoming CO line calls and use
6'
(speed dial) buttons programmed to perform functions that Hold or Park calls and access the page
system automatically.
Initialized data sets both LEDs 13 and 14 off for all telephone users (not allowed to use Speed Dial
buttons after answering incoming CO line calls).
LED 07~12
Not used at this time.
LED 13 LED 14 Description
OFF OFF Not allowed to use Speed Dial after answering a line call.
ON OFF Allowed to use Speed Dial buttons but subject to toll restriction tables.
OFF ON Allowed to use Speed Dial buttons and not subject to toll restriction.