Filter
Top Products
System & Station
Program 03 for DK424 – Flexible PCB Cabinet Slot Assignments
Strata DK Programming 5/99 3-9
System & Station
RCIU/RCIS or RCIU2/RCIS
When installing RCIU2/RCIS, enter the Caller ID circuit numbers on the record sheet in place of
the CO line number. Each RCIU2/RCIS slot uses eight Caller ID circuits. RCIU2/RCIS circuit
numbers are assigned automatically in numerical order (001~200) starting with the lowest slot
number, to the highest RCIU2/RCIS slot number in 8-circuit increments.
Important! If more than four circuits are needed, never install an RCIU without an RCIS.
On DK424, RCIU2/RCIS can be installed in any universal slot except slot 11 or if RSIU is
installed, slot 12; they do not have to be installed adjacent to corresponding CO lines. Refer to
Program *50 to manually assign RCIU2/RCIS circuits to CO line circuits.
RWIU
Code 61 must be set for all RWIU slots including slots that are vacant because they support RWIU
channels 09~32.
RCTU
The table below gives you slot locations and PCB Code Assignments for all RCTUs.
PCB Codes:
91=No RRCS
92=4 -circuit RRCS
93=8 -circuit RRCS
94=12 -circuit RRCS
Note When using RCTUA, Slot 15 and 16 does not support Speaker OCA or DIU Data
Switching. RCTUA does not support ACD, ACD/MIS, RS-232 Voice Mail Integration
(SMDI), and attendant console features.
RSIU
If an RSIU is installed in base cabinet slot 11, you must connect the programming station to circuit
6 in slot 12. In this case, a PDKU or PEKU should be installed in slot 12 and Station Port Number
000~007 will be in slot 12.
If an RSIU is not installed, you must connect the programming station to circuit 6 in slot 11 (Port
005) and/or circuit 6 in slot 12 (port 013). The station must be a 20-button digital LCD or
electronic LCD telephone. Also, if an RSIU is not installed, install a PDKU or PEKU in slot 11.
Processor R11 Slot
RCTU Slot
Cabinet 1
Slot Code
PCB Code
Assignment
RCTUA No Yes 00 91~94
RCTUB No Yes 00 91~94
RCTUBA Yes No 00 91~94
RCTUBB No Yes 01 91
RCTUC Yes No 00 91~94
RCTUD No Yes 01 91~94
RCTUE Yes No 00 91~94
RCTUF No Yes 01 91~94