Filter
Top Products
System & Station
Program 31 – Station Class of Service
Strata DK Programming 5/99 3-81
System & Station
LED 09 should be OFF for VM Auto Attendant “blind” transfer and VM tandem CO line
connection with automatic release. LED 09 should be ON for VM Auto Attendant supervised
transfer operation.
Example Programming Assignment to Set Up Voice Mail in a Distributed Hunt Group
All ports assigned to a Voice Mail Group should also be assigned to a unique Distributed Hunt
Group using Program 40. Each Program 31 Voice Mail Group must be associated with a unique
Program 40 Distributed Hunt Group that hunts only to its own Voice Mail Group ports. (See
above example of how to connect/program two voice mail/auto attendant machines and associate
them with two different DH groups.)
♦ If LED 15 or 19 is ON, turn LED 17 ON. If LED 20 is ON, turn LEDs 17 and 19 ON.
♦ For SMDI or DTMF integration, turn ON LEDs 04, 16, 17 and 18, and one of the following:
05, 06, 07, or 08 for all standard telephone ports connected to a VM unit.
♦ Turn LED 19 and 20 OFF if the VM unit does not respond properly to transfer recall (B-Tone)
signals when using any type of Voice Mail Interface.
♦ LED 09 – see above comments in Program Overview.
♦ If CO lines direct ring VM ports via Program 81~89, the data in Programs 81, 84, and 87
must be blank.
Important! Do not assign Program 31 VM/AA options to built-in Auto Attendant digital
announcer ports.
Program*32
Program 13
008 VMG1 Message Center
010 VMG2 Message Center
Program 31
008 – Button 5 ON
009 – Button 5 ON
VMG1 RSTU VM Ports
010 – Button 6 ON
011 – Button 6 ON
VMG2 RSTU VM Ports
Program *40
850 – 01 008
850 – 02 009
VMG1 DH Group Members
851 – 01 010
851 – 02 011
VMG1 DH Group Members
#200
#201
#202
#203
Telephones
using voice mail
machine #1
Telephones
using voice mail
machine #2
008
RS232C (SMDI)
N/A on DK14
Standard Telephone
Voice Mail Ports
#008
#009
DHG1/VMG1
DHG2/VMG2
#010
#011
010
Voice Mail
Machine #1
Voice Mail
Machine #2
1565