Filter
Top Products
61
Basic Installation
Peripheral Cabinet Control and Digital Services
Cards and Modules
The following table lists the peripheral cabinet control and digital services
cards and modules supported by the SX-200 ICP
Table 8: Digital Control and Digital Services Cards and Modules
Card or Module Important Details
Bay Control Card II One for each bay
Bay Control Card III Requires the SX-200 ELx cabinet
T1 Trunk Card A 24 circuit, high power card to CO or to another PBX,
maximum distance is 655 feet of shielded cable to the
Channel Service Unit
PRI Card For the SX-200 ELx cabinet Rev 4.4 or greater
(PN 9109-600-002-NA)
Supports the T1/E1 module and the FIM II or CIM. The PRI
card is not included in the high power card count. The PRI
card is a separate bay.
T1/E1 module Provides up to 2 T1 links of ISDN connectivity (24 or 48
channels) on the PRI card. Provides up to 2 T1 links of T1/D4
connectivity on the BCC III.
FIM II Installs on the BCC III or the PRI card.
Copper Interface
Module (CIM)
Installs on the BCC III or the PRI card.
DSP Module (Single) Installs on the BCC III. Provides CLASS functionality for 8
ONS/CLASS Line cards, 16 DTMF receivers and 16
conference bridges for Record a Call.