Filter
Top Products
234
SX-200 ICP MX Technician’s Handbook
Retrieving Logs and other System Files
using Kermit
Use this procedure to retrieve the logs and system files via a direct or
modem connection to the Maintenance port.
The files are compressed in a .tar.gz file. Use WinZip® or other
compression utility to open the file.
Your communication package must support the Kermit protocol to retrieve
logs and system files. HyperTerminal can be used for serial connections;
a secure Telnet client that supports SSL/TLS and Kermit can be used for
remote connections.
To download logs and other system files using Kermit:
1. Establish a connection (serial or secure Telnet) to the Maintenance
Terminal and begin a Maintenance session.
2. Press,
LOGS
GET_SYS_LOGS
ENTER
(Enter a file name—e.g., C:\Sys_Logs_Oct08.tar.gz)
CONFIRM
ENTER
The .tar.gz extension is mandatory.
The system then prompts you to exit to a local Kermit session.
Maintenance Tips
• Keep regular backups.
• Ensure that you record your SysID module number and your MOSS
number.
• Record all passwords.