Filter
Top Products
117
Basic Programming
The following table shows how Analog Networking and Call-by-Call
information co-exist in the Modified Digit Table.
In the “Digits to be Inserted” field, the definition of characters are:
*4 No SMDR for further modified digits
000 Call-by-Call digits, (speech, default O/G, clid)
*6 Send caller ID (DID to network)
*4 Start SMDR again for further modified digits
*04 Inserts Caller's Name (for calls over ISDN Trunks)
13. Complete ARS programming
- ARS programming must match with the service selection
programming that is entered through the ISDN Maintenance
Administration Tool (IMAT) computer.
14. Program the IMAT database according to the instructions in the next
section.
IMAT Programming
The IMAT software is used to program hardware and call characteristics
for the NSU and PRI card. IMAT is also used to install software upgrades
and backup the NSU database.
Installing IMAT Software
You can install IMAT on the Maintenance PC or on its own PC (IMAT PC).
Entry
Quantity to
Delete
Digits to be
Inserted
Comments
01 1 *4000*6*4*04 ISDN CxC and DID
Note: You must have IMAT software version 7.3 or greater.
Maintenance activities include access to the following maintenance
information:
• a list of all software files and versions on the NSU
• log messages that contain a history of activities and the status of faults
• a database
Note: If using a dial-up connection to the NSU, we strongly suggest that you
use a non-networked computer (a Windows 95/98 networked computer may
have difficulties communicating with Dial-up Networking).