Filter
Top Products
145
Basic Programming
Programming Voice mail and PMS Integration
Requirements
• MOSS Option 124, Voice mail Property Management System.
• A Hyatt Encore or HIS compatible PMS.
• An RS232-to-IP serial port converter, such as the Precidia
Technologies Ether232 or iPocket232 (available from the vendor or its
resellers), is required to connect the customer's PMS computer to the
Layer 2 switch. A dataset connection to a DNIC port or an RS-232
serial port on the SX-200 ICP controller will not work.
Follow the instructions supplied with the converter to program its
Ethernet and serial port settings. Programming for the Precidia
programming is provided below. The Ethernet settings (converter IP
address, Subnet Mask and Gateway IP address) to use depend on the
LAN configuration. The serial port settings to use are as follows:
Table 23: RS232-to-IP Serial Port Converter Settings
Setting Value
Protocol Transparent tcp (tunnel)
Local Port 0
Port Speed Varies with the PMS System:
HIS - 2400 baud, Even Parity, 7 Data & 1 Stop Bit, No
Flow Control
Encore - 1200 baud, Even Parity, 7 Data & 1 Stop Bit, No
Flow Control
Connection control Net-Link
Remote IP SX-200 ICP RTC IP Address
Remote Port 6830 (as programmed in CDE Form 12)
Terminators Not required