Filter
Top Products
27
Basic Installation
Installation checklist
Tools
Static strap
Phillips screwdriver (#1 and #2)
System Hardware and Software
An SX-200 ICP MX Controller
Optional hardware (see the previous table)
Release 3.0 software
A Layer 2 Ethernet switch
IP phones
CompactFlash memory card: 256M minimum (not required if using
FTP to upgrade software on Release 1.0 systems.)
Hard Drive Replaces the internal CompactFlash card to
provide more database storage. (Note: System is
available with factory-installed hard drive.)
Network Services Unit Supports digital trunk protocols for ISDN PRI
(NI2_STANDARD, NI2_5ESS, NI2_GTD5), and
QSIG (QSIG_ISO), DMS 100/250, 4ESS
Analog Services Unit Provides 24 ONS/CLASS circuits.
SX-200 EL Peripheral
Cabinets
Up to seven Peripheral Cabinets can be connected
to provide 672 TDM ports.
CompactFlash card 256 MB; for on-site software installation upgrades.
Use proper fitting screwdrivers to prevent damaging components
and fasteners.
Table 4: System Components (continued)
System components Capabilities
(Page 2 of 2)