Filter
Top Products
40
SX-200 ICP MX Technician’s Handbook
5. Lower the AOB onto the standoffs. Ensure it is well-seated.
6. Attach the screws.
7. Re-install the Stratum Clock Module (if it was removed).
8. Replace the cover and the front panel.
9. Connect lines or devices to the AOB ports and complete the required
programming; see the following sections for more information:
ONS telephones: “Connecting the Phones and Trunks” on page 66
and “Programming a Single Line Voice Station” on page 110
LS trunks: “Connecting the Phones and Trunks” on page 66 and
“Programming Analog Trunks” on page 131
Relays: “Connecting Music on Hold, Paging and Door Phone/Door
Opener” on page 72 and “Connecting a Night Bell and Alarm Device”
on page 74
Paging: “Connecting Music on Hold, Paging and Door Phone/Door
Opener” on page 72.