Filter
Top Products
153
Basic Programming
Programming SpectraLink Wireless
Telephones
Requirements
• SX-200 ICP Release 2.1 or later software and one IP device license
per Netlink phone.
• A properly configured and operational wireless LAN—includes
compatible 802.11b wireless access points and SpectraLink Voice
Priority Server (SVP).
Programming
SX-200 ICP
• In CDE Form 47, IP Networking, DHCP Options, Common Options
subform, program the following options:
• 3, Default Gateway IP address (default is 192.168.1.1)
• 66, SpectraLink firmware TFTP server IP address
(default is 192.168.1.2)
• 129, SX-200 ICP (RTC) IP address (default is 192.168.1.2)
• 130 - DHCP Server Identifier (default is MITEL IP PHONE)
• 151, SVP server IP address.
• Register the telephones with the SX-200 ICP either in CDE Form 09
(Desktop Device Assignments) or from the telephones by entering the
IP Set PIN Registration code and the desired directory number.
Notes:
1. Software for the SpectraLink telephones is provided on the
SX-200 ICP system software CD.
2. The push-to-talk feature of the NetLink i640 requires enabling
multicasting on the subnet used for the wireless telephones and
the SVP Server. Routers are typically configured with filters to
prevent multicast traffic from flowing outside of specific domains.
Where possible, the wireless LAN can be placed on a separate
VLAN or subnet to reduce the effects of broadcast and multicast
traffic from devices in other network segments.