Filter
Top Products
122
SX-200 ICP MX Technician’s Handbook
11. In the Internet account logon information box, leave the username and
password fields blank and then click Next.
12. Dialog boxes appear that warn you that you will not be able to connect to
your Internet service provider without your user name and your password.
Disregard these warnings and click Yes on these boxes to continue.
13. Enter the Connection name, and then click Next.
14. In the box to set up an Internet mail account, select No, then click Next.
15. De-select the option to connect to the Internet immediately, then click
Finish.
16. In the Network and Dial-up Connections window, right-click on the new
DUN connection, point to Properties, then click Configure.
17. From the Maximum speed (bps) list, select 38400 for the baud rate.
18. Click OK until you exit the windows.
Using IMAT
To start IMAT:
1. Launch IMAT (ignore messages about username configuration error).
2. In the File menu, select Connect to Remote Site.
3. Choose the Connection Medium: Serial or Ethernet Network Card.
4. If you selected Ethernet Network Card, enter the IP Address of the
Remote Site.
If you selected Serial, select the connection name you entered when
you created the dial-up network connection.
5. For the Ethernet Remote System, select PRI Card / Universal NSU.
6. Click Connect.
IMAT displays a confirmation of the connection (for example
“Connected over Ethernet”).
7. Press Okay.
8. In the File menu, select Load -> Database -> Sources -> PRI Card
/NSU. This loads the IMAT with the database from the NSU.
9. Press Load.