Filter
Top Products
156
SX-200 ICP MX Technician’s Handbook
Access Point (Symbol)
Parameter Requirement
ESS ID & IP
Addresses
Ensure that the correct IP settings for the Access Point, as well as the
desired Net_ID (ESS ID), are configured correctly.
Example:
IP Address - 192.168.0.25
Gateway IP Address - 192.168.0.1
DNS IP Address - 192.168.0.200
Net_ID (ESS) - 123456
Additional DNS - 192.168.0.201
Special
Functions
Ensure that the desired wireless security settings are defined correctly.
Example:
Configure Authentication and Encryption -> Pre-shared Key -> Enabled
Configure Authentication and Encryption -> WEP -> 40 bit
Configure Authentication and Encryption -> Configure WEP/KeyGuard
-> Encryption Key ID -> 1
Configure Authentication and Encryption -> Configure WEP/KeyGuard
-> WEP/KeyGuard Key Maintenance -> Key 1 -> 11111 11111
Configure Authentication and Encryption -> Configure WEP/KeyGuard
-> WEP/KeyGuard Key Maintenance -> Key 2 -> 22222 22222
Configure Authentication and Encryption -> Configure WEP/KeyGuard
-> WEP/KeyGuard Key Maintenance -> Key 3 -> 33333 33333
Configure Authentication and Encryption -> Configure WEP/KeyGuard
-> WEP/KeyGuard Key Maintenance -> Key 4 -> 44444 44444
Set System
Configuration
Ensure that Access Control is enabled in order to make the wireless
network more secure.
Example:
Set System Configuration -> Access Control -> Allowed
Set Access
Control List
Ensure that devices allowed on the wireless network have their MAC
Address entered correctly in the list.
Example:
Set Access Control List -> Address Type -> Individual -> Add-[F2] ->
08:00:0F:01:02:03
Table 24: SpectraLink Installation Checklist (continued)
(Page 2 of 3)