Filter
Top Products
173
Advanced Installation and Programming
DHCP Server Settings (Example)
The following settings must be programmed in the DHCP server:
Table 26 shows the DHCP settings programmed for this configuration.
See “Configuring a Windows 2000 DHCP server” on page 178 for
information on programming SX-200 ICP DHCP settings on a Windows
2000 DHCP server.
For information on programming the controller IP address and DHCP
settings, see page 178.
• DHCP IP Address Range
• Subnet Mask
• Option 03 (Router)
• Option 128 (TFTP Server
IP address)
• Option 129 (RTC IP)
• Option 130 (IP Phone DHCP Server)
• Option 132 (VLAN ID)
• Option 133 (Priority)
Table 26: DHCP Server Settings for Configuration 1 Example
Setting
DHCP Server on VLAN 1
(IP: 10.10.10.2)
Scope 1
Internal DHCP Server on
Controller
Scope 1
DHCP 10.10.10.10 to 10.10.10.100 20.20.20.10 to 20.20.20.100
Subnet 255.255.255.0 255.255.255.0
Opt. 03 10.10.10.251 20.20.20.251
Opt.128 20.20.20.1 20.20.20.1
Opt. 129 20.20.20.1 20.20.20.1
Opt. 130 MITEL IP PHONE MITEL IP PHONE
Opt. 132 2 2
Opt. 133 6 6