Filter
Top Products
152
SX-200 ICP MX Technician’s Handbook
6000 MAS
In the 6000 MAS Server Manager web interface,
- enter the ICP Name, IP address, and System ID (from Form 04,
Option 101) of the SX-200 ICP, and then select SX-200 ICP as the
Mitel ICP type.
- enter the MAC address (printed on a label on the bottom of the
phone) into the list of allowed MAC addresses on the 6010
Teleworker Solution blade panel in the 6000 MAS. When an
unregistered remote IP Phone attempts to connect, the 6010
Teleworker Solution server will automatically register the MAC
address.
Teleworker Phone
Register the phone by entering the following information:
- the IP Address of the 6010 server
- the Netmask or Subnet Mask for the office network (only required
if giving the phone a static IP address).
- the Default Gateway IP Address for the office network.
Testing IP Phone connectivity and voice quality
The 6000 MAS includes a tool, the Teleworker Network Analyzer, that is
used to test remote IP Phone connectivity to the 6010 Teleworker Solution
and voice quality.