Filter
Top Products
126
SX-200 ICP MX Technician’s Handbook
- For extensions (sets and stations), the following COS options must
be set:
4. Form 04, System Options/System Timers
- Assign a one to five second value to System Option 48, Limited
Wait for Dial Tone if ISDN trunks are present. Purchase and
program the correct Number of Links (option 96), and if required,
purchase and enable Remote LAN Access (option 93).
3. Form 13, Trunk Circuit Descriptor
- Assign a T1 trunk circuit descriptor. To receive CLID or DDI digits,
the PRI trunk must be a non-DISA trunk that is programmed with a
T1 E&M trunk circuit descriptor.
Table 18: Extension COS Options for Systems with embedded PRI
COS Option Setting
Notes
236 – Outgoing Trunk Callback Disable
237 – Outgoing Trunk Campon Disable
502 – Display ANI/DNIS Information and
possibly
613 – Display ANI information only
Enable Must have 502 enabled for
613 to function.
503 – Enable Calling Name Display Enable
702 – SMDR Overwrite Buffer Enable Required if option 806
SMDR – Record Incoming
Calls enabled
Notes:
1. Options 86, 91, 92, 94, and 95 are not available with embedded
PRI.
2. A system reset may be required after some options are
programmed. For example, changing the number of links in
option 96 requires a reset.