Support User Manuals

Telos Zephyr Xstream Two-Way Radio User Manual

Open as PDF

of 381

USER’S MANUAL

Section 5: GUIDED TOUR of the MENUS 86

5.2 The Default Screen

Encoder & Decoder

Settings

Per channel Bit Rate

& transmission Sample Rate

Active Interface (ISDN,

V.35, or Ethernet)

Status of ISDN or V.35

Lines 1 & 2

Thedefaultdisplay(shownabove)willappearafterthesystemhasbeenleftidlefor120

seconds(unlessdefeated).Itgivessummaryinformationonsystemstatus.Atthebottom,in

inversetestisthestatusofeachISDN"line"orV.35port.

w

IMPORTANT TIP!

You can defeat the timeout function that causes the default screen to appear if you wish. You

may want to do this so you can monitor some other status screen (such as the AUDIO Status

screen on the MX/MXP models).

To disable this screen, go to the 5th SYSTEM menu and set the Timeout option to "No".

5.3 The

Audio

Menu

5.3.1 The Zephyr Xstream's Audio Menu (non-mixer version)

AUDIO - Screen 1



PressingtheAUDIObuttononcewillshowthefirstAUDIOmenu,withthefollowingselections.

previous next