Support User Manuals

Telos Zephyr Xstream Two-Way Radio User Manual

Open as PDF

of 381

USER’S MANUAL

Section 3: GUIDED TOUR of the HARDWARE 27

w

IMPORTANT!

Do Not enable PS2 power if you plan to connect the S interface of your Xstream to a Zephyr

Classic or ZephyrExpress.

Doing so could cause damage to one of the units!

i

ISDN TIP!

If you are connecting to ISDN using the S (4-wire) Interface you can ignore the status of the

NT1 U Sync LED. It will be flickering rapidly if the U (2-wire) interface is not used.

V.35/X.21 Interface Option

Offersinterfacetodigitalsynchronousserialbit‐streams,primarilyfornon‐ISDNapplications.

BothV.35andX.21equipmentcanbeaccommodatedwiththeuseoftheappropriatecable.

MoreinformationcanbefoundinmanualSection9(TheV.35/X.21Interface).

Communications and Control Ports

RS‐232(DCE)

Usingafemale9‐pinD‐subconne

ctor,thisisan

RS‐232serialportusingthestandardmodem‐

styleformat.Thedefaultlineprotocolis:8bits,1

StopBit,NoParity,andnoflowcontrol.Bitrate

canbeadjustedfrom2400to57,600bpsusing

thers232menuselectioninthefirstSYSTEM

Menu.Thedefau

ltforthissettingis19,200bps.

previous next