Telos Zephyr Xstream Two-Way Radio User Manual


 
USER’S MANUAL
Section 5: GUIDED TOUR of the MENUS 102
TEL - Screen 3
PressingtheTELathirdtimewillshowthismenu.Theoptionsforthismenuareasfollows:
Telco
ThisistheprotocolforyourISDNcircuit.OutsideoftheUSA&Canada,itisusuallyETS300
(EuroISDN).IntheUSA&Canada,themostcommonprotocolisNationalISDN1(usetheNatl.I
1settin
g).In
JapanitwillbeINS65(JapaneseISDN).
w
IMPORTANT!
Each ISDN circuit has a certain ISDN protocol (or “switch type”) that the phone company
should have given you. By far the most common protocols in the USA & Canada are National
ISDN-1 & National ISDN-2 in which case you should set the Telco setting to Natl.I-1.
If you do not know what protocol your line is configured for, try Natl.I-1 first. If that does not
work, see Section 11 (Detailed Menu Reference) for hints on how to guess your protocol.
InSection11(DetailedMenuReference),we'veincludednumeroustipsinhowtoguessyour
TelcosettingforusersintheUSA&Canada.
Z
ZEPHYR CLASSIC VS XSTREAM COMPARISON!
The Zephyr classic does not distinguish between "National ISDN-1" protocol and "DMS-100
Custom Functional" protocol - Both use the Natl I-1 setting. This is not true for the Xstream. If
unsure which is correct for your ISDN circuit, try both settings.
Auto Ans.
ThisdetermineswhetheryourXstreamwillautomaticallyconnecttoincomingcalls.Whenset
toAllitwillanswerincomingcalls.Youwillheara"bleep"soundwhenthishappens.
WhensettoNonetheunitwillmakea"ringing"soundwhenthereisanincomingcall.A
messageisdisplayedonth
eLCDscreenshowingthecallingpartynumber(ifavailable)and
optionsallowingyoutoacceptorrejectthecall.
YoucanalsoselectZephyrorPhone,whichwillcausetheunittoonlyacceptdataorvoice
telephonecalls,respectively.Othertypesofcallswouldrequiremanualtreatment,asde
tailed
above.