Support User Manuals

Telos Zephyr Xstream Two-Way Radio User Manual

Open as PDF

of 381

USER’S MANUAL

Section 5: GUIDED TOUR of the MENUS 99

5.5 The

Tel

Menu

TEL - Screen 1 (Status)



ThefirstpressoftheTELbuttonwillshowtheTelStatusscreen.Thisgivesthecurrentstatusof

eachofyourISDNBchannels("lines"1&2).Themostcommonlyseenstatuswordsarethe

following(SeeSection10foradditionalinformation):

Ready–ThisindicatesthatthisBcha

nnelhascorrectlyinitializedwiththeTelcoandisableto

makeandreceivecalls.Thelineis"idle".

i

ISDN TIP!

A false ready may be displayed if your Telco setting is incorrect (see below), or if SPIDs are

not entered when required.

If your ISDN circuit uses the National ISDN or DMS-Custom ISDN protocol, you must enter

Directory Numbers. An absent, or incorrect, Directory Number can prevent your Xstream

from receiving calls, despite being in the Ready state.

Connected–Thelineiscurrentlydialeduptoanotherunit.Thenumberitisconnectedto(if

available),andthedurationoftheconnectionwillbedisplayed.

previous next