Support User Manuals

Telos Zephyr Xstream Two-Way Radio User Manual

Open as PDF

of 381

USER’S MANUAL

Appendix 6 – Special Operational Modes 322

TRANSMITTING AN MPEG Layer 3 or AAC STREAM

ChangingtheInterfaceselectioninthe3rdTELmenutoEthernetwillautomaticallystarta

stream.ThebitrateandTransmit(codingmode)forthatstreamaredeterminedintheCODEC

menu(seeabove).Theparty(ies)connectingtothisstreamwillneedyourIPaddresstoconnect

toit.

RECEIVING IN ETHERNET MODE – The DIAL Menu

ConnectingtoaSt

reamfromanotherXstream

1. Press<DIAL>

2. EntertheIPaddressofthedesiredstream(usethe<*>or<#>keyofthe"."

character.

3. Press<DIAL>again

w

IMPORTANT TIP!

The system will automatically determine the coding mode and bit rate automatically.

h

HOT TIP!

IP addresses do not include leading Zeros If you are connecting to an IP address given to

you as 012.345.000.789 the correct IP address would be 12.345.0.789



InSIPmodethiswillestablishatwo‐wayaudioconnection.InthecaseofRTPmode,"dialing"in

thismannerallowsyoutoreceivefromthatsite.Iftheywishtoreceiveyouraudio,theywould

needto“dial”you.Ofcourse,theycouldreceivefromsomeothersitesimultaneouslysendi

ng

toyoursite.Multiplesitesmayconnectsimultaneously.

previous next