Filter
Top Products
USER’S MANUAL
Section 12: System Functions and Remote Control 255
Description: Select ISDN telco type. Unit must be reset in order for the change to take
effect.
Name.......: levelin
Parameter..: <cons|prof>
Group......: Audio
Description: Select consumer or professional level for analog inputs.
Name.......: levelout
Parameter..: <cons|prof>
Group......: Audio
Description: Select consumer or professional level for analog outputs.
Name.......: location
Parameter..: [<number0..29> [<name> [audio]]] or <number0..29> !
Group......: Misc
Description: Store the current configuration as a location setup. If 'audio' is specified
the current audio settings will be stored along with the setup. If no parameter is
specified all location setups will be listed. If the exclamation mark is specified the
location setup is activated.
Name.......: log
Parameter..: [<dbg|ext|tcp|isdn|il2|il3|iie|istk>]
Group......: Misc
Description: Switch on a combination of logging channels. No parameter will switch off
logging.
w
IMPORTANT TIP!
The most useful logs for troubleshooting ISDN problems are log isdn, il2, il3, and iie.
We recommend turning off all logging modes by entering "Log <enter>" when you have
completed your troubleshooting.
Name.......: login
Parameter..: <password> [<new password>]
Group......: Misc
Description: Log into the command interpreter or change password. Use '-' to substitute
for an empty password when changing.
Name.......: logoff
Parameter..: -
Group......: Misc
Description: Log off from the command interpreter.
Name.......: loop
Parameter..: [<isdn|v35|mpeg|amother|astereo|amicshort|amiclong>]
Group......: Test
Description: Toggle various loop modes. If no parameter is specified switch off all
loop modes.
Name.......: miclowcut
Parameter..: [<mic1..4> <+|->]
Group......: Audio
Description: Switch on/off the lowcut filter for the specified microphone input channel.
Name.......: micphant
Parameter..: [<+/->]
Group......: Audio
Description: Switch phantom power on (+) or off (-).