Filter
Top Products
USER’S MANUAL
Section 12: System Functions and Remote Control 252
with a setup index it is erased. If the exclamation mark is specified the autodial is
activated. If only 'index' is specified this setup will be displayed.
Name.......: backlight
Parameter..: <0..0x7F>
Group......: Misc
Description: Select the frontpanel LCD screen backlight.
Name.......: bitrate
Parameter..: <56|64>
Group......: Codec
Description: Choose bitrate per ISDN channel (in kbps).
Name.......: buttonlock
Parameter..: <+|->
Group......: Audio
Description: Enables/disables frontpanel mixer button locking.
Name.......: contrast
Parameter..: <0..0x7F>
Group......: Misc
Description: Select the frontpanel LCD screen contrast.
Name.......: dec
Parameter..: [ancr|init|r|rlc]
Group......: Status
Description: Display decoder status info or read ancillary (ancr) data or re-initialize
access pointers (init) or read config table (r) or reset lost lock counter (rl c).
Name.......: decomode
Parameter..: <Auto|G722|L2M64|L2|L3D/M|L3|AAC64|AAC|AACLDM64|AACLD>
Group......: Codec
Description: Choose decoding algorithm.
Name.......: delay
Parameter..: <msec>
Group......: Misc
Description: Delay for the given amount of milli-seconds. Useful for batch commands.
Name.......: dtmf
Parameter..: <numbers|+|->
Group......: ISDN
Description: Send DTMF tones to far end of a POTS connection or enable/disable DTMF
tone transmission.
Name.......: encomode
Parameter..: <L3dual|L3mono128|L3joint|L3stereo|L2half64|L2mono64|L2mono128|L2joint
|L2stereo|G722|AACmono64|AACmono128|AACjoint|AACstereo|AACjoint64|AACLDmono64|AACLD
mono128|AACLDjoint|AACLDstereo>
Group......: Codec
Description: Choose encoding algorithm.
Name.......: etherrate
Parameter..: <8|12|14|16|18|20|24|32|40|48|56|64|80|96|112|128>
Group......: Codec
Description: Choose bitrate for Ethernet operation.
Name.......: eval
Parameter..: <expression>...
Group......: Misc
Description: Evaluate a numerical expression.
Name.......: vars