Filter
Top Products
USER’S MANUAL
Appendix 8 – Ordering ISDN for the USA and Canada 338
PROTOCOL: AT&T Point-to-Point (Custom)
Software version 5E4.2 and above.
CO Values:
Line Type (DSL class): Point-to-Point (PTP)
B1 Service: On Demand (DMD)
B2 Service: On Demand (DMD)
Maximum B Channels (MaxChan): 2
CSV Channels: Any
Number of CSV calls: 1
CSD Channels: Any (CSD is required; CSV may be omitted if requested by user)
Number of CSD calls: 2
Terminal Type: A
Number Display: No
Call Appearance Pref:Idle
1010XXX Long Distance access: Yes
Turn off features such as; packet mode data, multiple call appearances, Electronic Key Telephone
Service (EKTS), shared directory numbers, accept special type of number, intercom groups, network
resource selector (modem pools), message waiting, hunting, interLata competition, etc.
Note for AT&T/Lucent 5ESS on loop extended lines: Per Lucent Technologies, REX test must be
disabled for this line using one of the following: ASDFI266 (Prohibit REX on BRI lines per office) or
ASDFI267 (Prohibit REX on BRI lines per line)
Give your customer the following information:
1) One Directory Number
PROTOCOL: AT&T Point-to-Multipoint (Custom)
Not supported by the Telos Zephyr Xstream.
Please provide National ISDN or AT&T Point-to-Point (Custom)