Support User Manuals

Telos Zephyr Xstream Two-Way Radio User Manual

Open as PDF

of 381

USER’S MANUAL

Section 13: Deep Tech Information and Troubleshooting 271

h

HOT TIP!

If you don't know a valid DNS (domain name sever) IP address, you can still update your

Xstream from the Telos ftp site by obtaining the current IP address of the Telos FTP server as

follows:

1. Go to the MS-DOS command line of the Windows machine (Run " cmd <enter>" for Win

2000 or Win NT; or Run "command <enter>" for Win 95 or 98.

2. From the command line type "ping ftp.zephyr.com <enter>"

3. You should receive a reply. If you do not get a reply check with your IT manager for

assistance. The reply will include the current IP address of the Telos FTP server.

4. Enter this IP address as "FTP site" in the Xstream.

Manual Replacement Method (10 Base-T hardware only)

Thesystem’ssoftwareiscontainedwithinaflashmemorySIMMmodule,similarinsizeand

formtothoseusedforPCmemory.Thefollowingdirectionsareforqualifiedservicepersonnel

only.Ifyouneedtochangethismodule,followtheprocedurebelow:

h

HOT TIP!

This method of updating your Xstream will result in losing your Location Setups and Dial

Setups.

1)RemovethetopcoverasdescribedinSection13.1.

2)RemovetheoldsoftwareSIMM

• Turntherightsideoftheunittowardsyou(thepowersupplywillbeawayfrom

you).

• NearthefrontofthemainPCboard(PWB)youwillseearibboncable

connectorandaverysm

allPCboard(theSIMMmodule)directlytotherightof

it.

• PushgentlyoutwardonthetwometalcatchesoneitherendoftheSIMM

module.Itshouldpoptowardyou.

• PivotthetopoftheSIMMmoduletowardyouandthenliftitout.Notethe

groovednotchontherightend.

3) Installthene

wSIMMmodule.

previous next