Telos Zephyr Xstream Two-Way Radio User Manual


 
USER’S MANUAL
Section 11: THE WORKS – Detailed Menu Reference 231
Gateway
ThisisneededonlywhenusingIPtocommunicatewithotherequipmentoutsideyourlocal
network.ItisrequiredifyouaredownloadingnewsoftwaredirectlyfromtheTelosFTPsite.
ThisisalsoanIPaddress,seetherulesabove.
ThisistheIPaddressofagatewayrouterconnectingyoutotheinternet.ItisanIPaddressjust
aswiththepreviou
sitemsandisenteredinthesameway.Youwillneedtogetthisfromyour
networkadministratororinternetserviceprovider.Thisisanumericonlyfield;enterthedigits
asdescribedabove.
DNS
DNSisneede
donlywhendownloadingsoftwaredirectlyfromtheTelosFTPsite.ThisisanIP
address,seetherulesabove.
ThisistheIPaddressoftheDNS(DomainNameServer)youwillbeusing.ItisanIPaddressjust
aswiththepreviousitemsandisenteredinth
esameway.Youwillneedtogetthisfromyour
networkadministratororinternetserviceprovider.
h
HOT TIP!
If you need to "borrow" the IP address of a Windows computer to use when updating your
extreme, here are some tips:
1. Go to the MS-DOS command line of the Windows machine (Run " cmd <enter>" for Win
2000 or Win NT; or Run "command <enter>" for Win 95 or 98.
2. From the command line type "ipconfig <enter>". The IP address, and default gateway
for that machine will be displayed. Write down this information.
3. Power off the computer that you just obtained this information from (or disconnect it
from your network)
4. Enter this IP address and gateway into the Xstream
5. Connect the Xstream to your network.
6. Be sure to delete these entries from the Xstream when you are finished. You can then
power up the computer.