Filter
Top Products
USER’S MANUAL
Section 11: THE WORKS – Detailed Menu Reference 222
i
ISDN TIP!
More on Telco Protocols: Guessing the Telco setting in Canada & USA:
∗ If you were given only a single phone number and no SPIDs try AT&T Cust (PTP).
∗ If you were given 2 SPIDs with the format: 01+7 digit phone #+0 try AT&T Cust (PTP).
∗ If you were given 2 SPIDs with the format: 01+7 digit phone #+000 or 01+7 digits +011
try Natl.I-1.
∗ If you were given 2 SPIDs with the format: area code+7 digit phone #+4 digits (for
example 0101, 0100, 0111, or 1111) try Natl.I-1. If that fails Try DMS Cust.
∗ If you were given 2 SPIDs with the format: area code+7 digit phone #+1 digit (for
example 1, or 0) try DMS Cust. If this fails try Natl.I-1.
∗ If you were given 2 SPIDs with the format: area code+7digit phone #+2 digits (for
example 01, 11, 02, or 00) try DMS Cust. If that fails try Natl.I-1.
∗ If you were given 2 SPIDs with the format: area code+7digit phone #+3 digits (for
example 000,001) try Natl.I-1. If that fails try DMS-Cust.
∗ If you were given a single phone number and a single SPID with the format: of 01+7
digit phone#+0 try AT&T Cust (Do not enter this SPID).
∗ If you were given a single phone number and a single SPID with the format: of 01+7
digit phone#+00 try Natl.I-1. If that fails try AT&T Cust.
∗ If you were given a single phone number and a single SPID with the format: of area
code+7digit phone#+4digits (for example 0101, 0100, 0111, or 1111) Try Natl.I-1. If
that fails try DMS Cust.
Z
ZEPHYR CLASSIC VS XSTREAM COMPARISON!
Zephyr (classic) and ZephyrExpress use the Telco option "Natl I-1" for both the National
ISDN protocol and the DMS Custom functional ISD protocol.
Zephyr Xstream distinguishes between these two protocols so the correct choice must be
made.
Auto Ans.
ThisdeterminesiftheXstreamwillautomaticallyconnecttoincomingvoicecalls,datacalls,or
bothtypesofcalls.
None
Nocallswillbeansweredautomatically.ZephyrXstreamwillmakeawarbling
soundandthecallerIDoftheincomingcall(ifavailable)willbedisplayed.To
acceptthecallpress<S
EL>.Torejectthecallpress<5>or<6>then<SEL>and
thefarendpartywillgeta"fastbusy"("engaged"/"congestion")forPOTSor
G.711calls,ora"CallRejected"cause21or"Normalcallclearing"cause16for
ISDNcalls.
All