Filter
Top Products
4.3 CONNECTING THE VPS WITH THE PANASONIC KX-TD816, KX-TD1232 AND KX-TD612
Installation Manual 87
c)
Enter the system number ([0] or [1], master/slave). The system displays the ROM
version and the date it was created.
This version must be the required version for DPT Integration to be utilised (both
systems if system connection is used).
2.
Set the date and time using System Programme [000].
3.
Set PBX extension numbering using System Programme [003].
4.
Assign the Voice Mail Port. This programme tells the PBX which jack will be connected to
the VPS. This allows the PBX to send the proper DPT Integration information to those ports.
Notes
• You can assign a maximum of 6 jacks (12 ports) with the KX-TD1232 or KX-
TD816.
• If you are configuring a 2-cabinet system, all Voice Mail Ports should be
assigned to either the Master or Slave System.
From the SYS-PGM NO ? screen:
a)
Enter [126] or [117].
b)
Press the NEXT button (SP-PHONE).
Screen output: M: # # #
c)
Enter the jack number (02-64) of the port you will use for the Voice Mail.
d)
Press STORE.
e)
Press END (HOLD) when finished.
5.
Skip this step unless setting flexible numbering.
System Programme [127] or [118] (Voice Mail Extension Number Assignment) is
automatically set. This programme allows you to assign an extension number to each
Voice Mail port. Since a jack connected to the VPS provides 2 extensions, this enables
you to assign extension numbers to each port. You can assign any extension number
that is not already assigned to another port. To reach the VPS, users dial these
extension numbers. It is not necessary to change the default programming for the
extensions 265 and 266 (or 165 and 166).
From the SYS-PGM NO ? screen:
a)
Enter [127] or [118].
b)
Press the NEXT button (SP-PHONE).
Screen output: VM NO?
c)
Press the NEXT button (SP-PHONE).
Screen output: VM-01:#_ _ -1: 265 (or 165)
( _ _ = the port number you entered in programme 126 [or 117])
d)
Enter the Extension Number that you want this port to have.
(The default extension number for port 1: 265 [or 165]; port 2: 266 [or 166])
e)
Press STORE.
Conditions: Jack 01 cannot be used as a Voice Mail port. A jack
programmed as a Manager Extension (System
Programme [006]) cannot be used in this programme.