Filter
Top Products
3.2 PBX PARAMETERS AND PORT SETTINGS
Installation Manual 55
is busy. PBXs differ in how they handle this function. Test from an SLT to determine the
sequence.
• Release Sequence for Call Waiting:
This sequence is carried out by the VPS to release call waiting. PBXs differ in how they
handle this function. Test from an SLT to determine the sequence.
Inband Signalling
These parameters are used when the Integration Mode is set to Inband. If the PBX type is set
to a KX-T series system, these parameters will be automatically set. If another type PBX is
used, check that system’s installation manual for settings.
Digit Translation Table Parameters
These parameters allow PBXs that have a fixed Follow-on ID sequence to be used with the
VPS. For example, a Follow-on ID sequence of [ 201] can be changed to [#6201] by using
these parameters.
• Inter-Digit Time-Out: This parameter defines the duration of incoming signals (Follow-
on ID) from the PBX to the VPS. The Digit Translation Table is applied to the digits
received within this time.
Table 3-4
Code
(default)
Call State Sent to the Voice Mail Port When...
1 Ringback Tone The extension dialled is ringing.
2 Busy Tone The extension dialled is busy.
3
Reorder Tone An invalid extension number is dialled or the call is
inadvertently connected to another Voice Mail port (also
heard when no touchtone receiver is available to the Voice
Mail extension).
4 DND The extension dialled has set DND (Do Not Disturb).
5 Answer The extension dialled is answered.
6
Forwarded to
Voice Mail
(Ringing)
The extension dialled is forwarded to Voice Mail and
another Voice Mail port is able to answer. (This lets the first
Voice Mail port, usually an Auto Attendant, send the call to
the other Voice Mail port.)
7
Forwarded to
Voice Mail (Busy)
The extension dialled is forwarded to Voice Mail and no
other Voice Mail ports are available to accept the call. (This
signals the Voice Mail port [usually Auto-Attendant] to let the
caller to leave a message.)
8
Forwarded to Extn. The extension dialled is forwarded to another non-Voice
Mail extension.
9
Confirmation Tone The Message Waiting Lamp On or Message Waiting Lamp
Off code is dialled successfully.
#9
Disconnect The caller disconnects. The telephone company must send
a CPC signal to the PBX for this feature to work on outside
calls.