Filter
Top Products
B3 SYSTEM ADMINISTRATION—SETTING COS (CLASS OF SERVICE) PARAMETERS
Installation Manual 219
Prompt Mode 1. System
2. User 1
3. User 2
(User 1)
Specifies the language used for voice prompts played for
the subscriber during a Message Waiting Notification
Call and Subscriber Service.
Note: If User 1 is specified as Prompt Mode but not
recorded by the Message Manager, the VPS will
automatically play the factory-recorded System prompts
in English. By default, User 1 prompts are not recorded.
Remote Call
Forward to CO
1. Yes
2. No
(No)
If set to "Yes", Remote Call Forwarding can be set to an
outside (CO) line; a subscriber can program his
extension from a remote location to forward various
types of calls to either "Telephone No.1" or "Telephone
No.2" (preprogrammed in the Mailbox Setting), or to any
other telephone number.
Note: The Remote Call FWD to CO feature is available
if DPT Voice Mail Integration is activated with a
Panasonic KX-TD series telephone system.
Important Note: With respect to PBX programming, it is
possible that "Call Forward to CO" is disabled. To enable
VPS Remote Call Forwarding, the KX-TD1232, for
example, must be programmed properly. For the COS of
the extensions whose calls are to be forwarded to an
outside (CO) line, enable the following: [504] Call
Forward to Outside Line.
Delete
Message
Confirmation
1. Yes
2. No
(No)
If set to "Yes", the VPS requests confirmation from the
mailbox owner before erasing a message left in the
mailbox. If set to "No", the message is erased
immediately.
Number of
CIDs for Caller
Name
Announcement
0-30
(30)
Specifies the maximum number of Caller IDs which
subscribers can assign for the Personal Caller Name
Announcement.
Personal
Greeting for
CID
1. Yes
2. No
(Yes)
If set to "Yes", subscribers can utilise the personal
greeting feature for Caller ID.
Caller ID
Screening
1. Yes
2. No
(Yes)
If set to "Yes", subscribers can utilise the Caller ID
Screening feature.
Table B-7
Parameter Value Range
(Default)
Description/Function