Panasonic KX-TVP200 Answering Machine User Manual


 
A1 SYSTEM FEATURES
182 Installation Manual
Calling a Beeper
(Pager)
Allows a subscriber to be notified by a beeper
(pager) when he has message(s). If the
beeper (pager) has a display, it is possible to
send to it a callback number. The callback
number can be recorded when a caller leaves
a message. If the caller does not leave a
callback number, the System Callback No., or
the callers number if it is received through a
telephone companys Caller ID service, will
be sent instead.
To utilise this feature, follow the procedure
below.
1)
Go to the System Administration Top Menu,
and type 1-2 (Program-Class of Service) and
COS No.(1-63).
Select "Yes" in the Authorization for Message
Notification parameter. Make 1 selection from
the available options in the Beeper Callback
No. Entry Mode parameter.
2)
From the System Administration Top Menu,
type 1-1-1-Mailbox No.-Y-2-Device No.(1-3)
(Program-Mailbox Setting-Enter/Edit-Mailbox
No. Entry-Do you want to edit this mailbox?-
Notification Setting-Device No. Entry).
For the Dial Number parameter: enter your
PBXs line access code before the beeper
(pager) number for dialing outward; enter an
X after the beeper (pager) number. (The X is
for the caller to enter his number as the
callback number which will later appear on
your beeper [pager].) Finally, select "Beeper"
in the Type of Device parameter.
See "Dial Number" and "Type of
Device" in Table B-5 in B2
SYSTEM ADMINISTRATION
MAILBOXES.
See "Authorization for Message
Notification" and "Beeper
Callback No. Entry Mode" in
Table B-7 and Table B-8 in B3
SYSTEM ADMINISTRATION
SETTING COS (CLASS OF
SERVICE) PARAMETERS.
See "System Callback Number"
in Table B-30 in B6.7 Other
Parameters.
See C3 SETTING COS (CLASS
OF SERVICE) PARAMETERS.
Class of Service
(COS)
There are 62 COS levels for subscribers.
COS 63 is for the Message Manager and
COS 64 is for the System Manager.
Either the System Administrator (using a
personal computer) or the System Manager
(using a telephone) can change COS
assignments.
See 7.3.2 COS (Class of
Service) Assignments.
See B3 SYSTEM
ADMINISTRATIONSETTING
COS (CLASS OF SERVICE)
PARAMETERS.
See "Creating and Editing a
Mailbox" in C2 SETTING UP
MAILBOXES.
See C3 SETTING COS (CLASS
OF SERVICE) PARAMETERS.
Table A-1
FEATURE DESCRIPTION REFERENCES