Filter
Top Products
B5 SYSTEM ADMINISTRATION—SERVICE SETTINGS
Installation Manual 231
Operator’s Parameters-Day Mode-Operator 1
Use this parameter to enable or disable the Operator Service. It specifies Operator 1’s
extension and the treatment of the calls transferred to that extension. The extension number
assigned for Operator 1 in the Day Mode will be for the Message Manager. When Operator
service is enabled, operator-seeking calls first reach Operator 1’s extension.
Notes
• Because the extension number assigned for Operator 1 in the Day Mode is for the
Message Manager, you cannot assign this extension to any other mailbox.
• By default, the extension number for the Message Manager’s extension (assigned
for Operator 1 in the Day Mode) is "0". However, the default setting cannot be
used with the Message Waiting Notification—Lamp feature and the Remote Call
Forwarding Set feature. When using these features, You must assign the
extension number that is included in the Extension Numbering Plan.
To access the proper menu for Operator Parameters-Day Mode-Operator 1, follow
the menu path as shown:
System Administration Top Menu-1-4-1-2-1-1
Table B-12
Parameter Value Range
(Default)
Description/Function
Operator
Service
1. Disable
2. Enable
(Enable)
Enables or disables the Operator Service feature.
Note: All non-touchtone input calls in Automated
Attendant Service will be transferred to the General
Delivery Mailbox when the Operator Service is disabled.
Operator’s
Extension
1-5 digits
(0)
Specifies the extension number for Operator 1.
Note 1: The default setting (0) cannot be used with the
Message Waiting Notification—Lamp feature. An
extension number must be assigned that is included in the
Extension Numbering Plan.
Note 2: The extension number must not be assigned
anywhere else (in particular, the extension must not have
a mailbox). Otherwise, you will get an error message.
Operator’s
Mailbox No.
2-5 digits
(998)
Callers to Operator 1 are prompted to leave a message in
this mailbox depending upon how the Busy Coverage or
No Answer Coverage modes are set.