Filter
Top Products
C3 SETTING COS (CLASS OF SERVICE) PARAMETERS
282 Installation Manual
Play Personal Greeting for Caller ID
Caller ID Screening
Message Notification
22.
a)
The current setting plays. Press [1] to change the setting (enable or disable).
b)
Confirm the entry is correct and Press [2] to accept it.
23.
a)
The current setting plays. Press [1] to change the setting (enable or disable).
b)
Confirm the entry is correct and Press [2] to accept it.
24.
a)
The current setting plays. Press [1] to change the setting (enable or disable). If the
Message Notification is enabled, go to Step 24b below.
b)
Press [1], [2], [3], [4], or [5] to choose the desired Beeper Callback Number Entry
Mode.
• [1] Caller Select Mode
• [2] Without message mode
• [3] Before message recording mode
• [4] After message recording mode
• [5] Disable All Entry Mode (Caller cannot access beeper [pager])
c)
Confirm the entry is correct and Press [6] to accept it.
d)
The current setting of MWL Notification for Unreceived Message plays. Press [1]
to change the setting (enable or disable).
e)
Confirm the entry is correct and Press [2] to accept it.
f)
The current setting of Device Notification for Unreceived Message plays. Press [1]
to change the setting (enable or disable).
g)
Confirm the entry is correct and Press [2] to accept it. Return to Step 24a above.