Filter
Top Products
A1 SYSTEM FEATURES
Installation Manual 189
Intercom Paging
(DPT Integration
Only)
Permits callers to page subscribers by PBX
paging (there are different kinds of PBX
paging, and these can be specified by VPS
programming) when the subscribers have set
Intercom Paging for Call Transfer or when the
subscribers have set Intercom Paging for
Incomplete Call Handling. The caller is briefly
placed on hold while the VPS announces the
page and until the subscriber answers the
page. The subscriber can answer the page
from any extension using the paging answer
code; this code is specified in the PBX User
Manual. For a Caller ID Caller, if his name
has been recorded for the Caller Name
Announcement feature, the name will be
announced at the end of the page. If the
caller’s name has been recorded for both the
System and Personal Caller Name
Announcement, the VPS will use the
personal caller name.
To utilise this feature, follow the procedure
below.
1)
Go to the System Administration Top Menu,
and type 1-2 (Program-Class of Service) and
COS No.(1-62). Select an Intercom Paging
Group (1-17) for this COS. If set to Group 17,
the Intercom Paging feature is activated for
all groups.
2)
From the System Administration Top Menu,
type 1-5-7-7 (Program-System Parameter
Setting-Others-Intercom Paging
Parameters). Adjust the "No Answer Time for
Intercom Paging" to your preference (the
default is 5 s). For the Intercom Paging Group
you selected in Step 1, set the Intercom
Paging access code in "Paging Code for
Group 1-16" and "Paging Code for All
Groups".
• See 4.1 GUIDELINES FOR DPT
INTEGRATION.
• See "Intercom Paging (1-5-7-7)"
in 5.2.2 Custom Service
Features.
• See "Intercom Paging Group" in
Table B-7 in B3 SYSTEM
ADMINISTRATION—SETTING
COS (CLASS OF SERVICE)
PARAMETERS.
• See "Other Parameters-
Intercom Paging Parameter" in
B6.7 Other Parameters.
• See "Intercom Paging" in
GLOSSARY.
Table A-1
FEATURE DESCRIPTION REFERENCES