Panasonic KX-TVP200 Answering Machine User Manual


 
3.2 PBX PARAMETERS AND PORT SETTINGS
54 Installation Manual
Integration Mode:
Specifies the method of integration to be used between the VPS and PBX. DPT Integration
is only available when a KX-TD series PBX is connected and the software is upgraded.
Operator Transfer Sequence:
Tells the VPS how to transfer a call to the operator.
Example: FTX [flash (recall)dial tonedial (operator) extn.]
Extension Transfer Sequence:
Tells the VPS how to transfer a call to an extension.
Example: FTX [flash (recall)dial tonedial extn.]
Alternate Extension (Transfer Sequence):
Tells the VPS how to transfer a call to an extension that belongs to the "Alternate Extension
Group". This is useful for extensions that need a special transfer procedure (i.e., blind
transfer) such as modem extensions.
Example: FTXD [flash (recall)dial tonedial extn.hang up]
Reconnect Sequence on Busy:
Tells the VPS how to return to the caller if the called extension is busy. PBXs differ in how
they handle this function. Test from an SLT to determine the sequence.
Reconnect Sequence on No Answer:
Tells the VPS how to return to the caller if the called extension does not answer. PBXs differ
in how they handle this function. Test from an SLT to determine the sequence.
Reconnect Sequence on Refused Call:
Tells the VPS how to return to the caller if the called extension’s owner has enabled Call
Screening to not take the call. PBXs differ in how they handle this function. Test from an
SLT to determine the sequence.
Light On Sequence for Message Waiting Lamp:
This is the dialling sequence that the VPS must use to turn on a message waiting lamp at
an extension.
Light Off Sequence for Message Waiting Lamp:
This is the dialling sequence that the VPS must use to turn off a message waiting lamp at
an extension.
Call Waiting Sequence:
This sequence is carried out by the VPS to perform call waiting when the called extension
Table 3-3
SEQUENCE CODES
D Disconnect
F Flash (Recall)
R Ring Detection
S Silence Detection
T Dial Tone Detection
W Wait for 1 Second
X Dial Extension
A: Answer
0-9, , #
Touchtone Digits