Filter
Top Products
B5 SYSTEM ADMINISTRATION—SERVICE SETTINGS
238 Installation Manual
Call Transfer
Anytime
Extn./Mbx/No
(Extn.)
Specifies the destination to which the call will be
transferred. The "Extn." setting (enter "E") enables
callers to be transferred directly to their intended party
by dialling the extension number. The "Mbx" setting
(enter "M") enables callers to leave messages in a
mailbox by entering the mailbox number. The "No"
setting (enter "N") disables extension transfer and
mailbox transfer; only 1-digit entries work (following the
Custom Service menu).
Note: This parameter should be set to "No" when
Subscriber Service is specified as a Custom Service
option and it is desired that digits can be entered very
quickly to specify a mailbox. Therefore, in most cases,
"No" is the best setting for this parameter. This is
especially true if you do not want to explain "Call
Transfer Any Time" in your Custom Service menu
recording.
Wait for
Second Digit
1-5 s
(1)
Resolves the problem when the first digit of the
extension or mailbox number is the same as one of the
Custom Service menu choices. The VPS waits the
specified period of time for a second digit to be dialled.
If the time period expires without a second digit being
entered, the system assumes the caller has selected a
menu choice. Use this parameter only if "Call Transfer
Anytime" is set to "Extn." or "Mbx".
No DTMF Input
Operation
a-f
(c)
*
See the following
"Keypad
Assignment".
Specifies how to handle a call when there is no
response to the menu message. No response usually
indicates that the caller is using a rotary phone. The
factory setting is "C. Operator", which allows the caller
to be automatically connected to an operator after
message playback.
Table B-16
Parameter Value Range
(Default)
Description/Function