Filter
Top Products
4.2 KX-TD500 PROGRAMMING FOR DIGITAL INTEGRATION
82 Installation Manual
e)
Click "Apply" to save the changed data.
f)
Set "Status" to "INS".
Screen output:
5.
To set the trunk (outside line) features, follow the instructions in "Settings for the trunk
(outside line) features" (3.3.3 KX-TD500 Programming for Inband Integration in 3.3
CONNECTING THE VPS WITH PANASONIC KX-T SERIES PBXs).
6.
Connect the jack assigned in Step 4 to the VPS.
7.
Connect your personal computer to the VPS and start your communication software (i.e.,
HyperTerminal, Procomm Plus, Smartcom...).
Communication Parameters: 9600, 8 Bit, None, 1
8.
Turn the power switch off at the VPS and set the Rotary Switch to position 5.
Only perform this step when initially setting up the system.
CAUTION
Setting the Rotary Switch to position 5 will default the Voice Processing System,
resulting in a loss of all user programming and voice messages (except User 1 and
User 2 prompts).
9.
Turn the power switch back on at the VPS and wait approximately 7-8 min while the system
initialises.
Before starting the VPS, make sure all installation and line connections have been
done as described in Section 2 INSTALLATION.