Filter
Top Products
A1 SYSTEM FEATURES
194 Installation Manual
Message Waiting
Notification—Device
Automatically notifies the subscriber/
Message Manager of the reception of new
message(s) by calling either a specified
telephone or beeper (pager) number. The
message will automatically play when the
subscriber/Message Manager answers a call
to the telephone. When a beeper (pager) is
called, the subscriber/Message Manager
must call the VPS and access the message
from the mailbox. Notification can be
scheduled either on or off for a maximum of 2
times during any 24 h period.
The subscriber/Message Manager can
program a maximum of 3 telephones or
beepers (pagers) in sequence. The VPS will
redial the number or number sequence for a
specified number of times until answered.
Notification is terminated when the
subscriber/Message Manager has received
the message, when the last number has been
called a specified number of times, or at the
completion of the programmed time period.
• See "Message Waiting
Notification from an SLT" in
3.1.4 PBX Requirements for
Integration.
• See "Notification Setting" in B2
SYSTEM ADMINISTRATION—
MAILBOXES.
• See "Authorization for Message
Notification" in Table B-7 and
Table B-8 in B3 SYSTEM
ADMINISTRATION—SETTING
COS (CLASS OF SERVICE)
PARAMETERS.
• See "Other Parameters-
Message Waiting Notification" in
B6.7 Other Parameters.
• See C3 SETTING COS (CLASS
OF SERVICE) PARAMETERS.
• See D3 SETTING UP
MESSAGE WAITING
NOTIFICATION.
• See "Message Waiting
Notification" in GLOSSARY.
• See 4.8 Message Waiting
Notification in the Subscriber’s
Guide.
Table A-1
FEATURE DESCRIPTION REFERENCES