Filter
Top Products
B7 SYSTEM ADMINISTRATION—HARDWARE SETTINGS
270 Installation Manual
Note
Default values in the above table vary depending on the settings of "PBX type" and
"Inband Integration" (PBX Interface Parameters).
Table B-43
Parameter Value Range
(Default)
Description/Function
Ringback
(1)
Indicates "Ringback Tone". Sent to the VPS when the
extension dialled is ringing.
Busy
(2)
Indicates "Busy Tone". Sent to the VPS when the
extension dialled is busy.
Reorder
(3)
Indicates "Reorder Tone". Sent to the VPS when an
invalid extension number is dialled or when inadvertently
connected to another VPS.
DND
(4)
Indicates "Do Not Disturb Tone". Sent to the VPS if the
dialled extension has the Do Not Disturb feature enabled.
Answer
(5)
Sent to the VPS when the called extension answers the
call.
Forward to VM
Ringing (6)
Sent to the VPS if the called extension is forwarded to a
voice mail port and that voice mail port is available to
accept the call.
Forward to VM
Busy (7)
Sent to the VPS if the called extension is forwarded to a
voice mail port and that voice mail port is not available to
accept the call.
Forward to
Other
Extension
(8)
Sent to the VPS if the called extension is forwarded to
another, non-Voice Mail extension.
Confirmation
(9)
Sent to the VPS when it successfully dialled a Message
Waiting Lamp On or Message Waiting Lamp Off Code.
Disconnect (#9) Sent to the VPS when the other party goes "on-hook".
Table B-44
Parameter
Other
Manufacturers
KX-T series
T308 T616
T1232/
TA series
T96 T336
TD816/
1232
TD612
TD500
Ringback N/A N/A N/A 1 A1 A1 1 1
Busy N/A N/A N/A 2 B1 B1 2 2
Reorder N/A N/A N/A 3 B2 B2 3 3
DND N/A N/A N/A 4 B3 B3 4 4
Answer N/A N/A N/A 5 A2 A2 5 5
Forward to VM
Ringing
N/A N/A N/A 6 C1 C1 6 6