Filter
Top Products
C3 SETTING COS (CLASS OF SERVICE) PARAMETERS
Installation Manual 281
Direct Mailbox Access
Intercom Paging Group Number
Subscriber Service Prompt Mode
Remote Call Forward to CO
Delete Message Confirmation
Number of Caller IDs for Personal Caller Name Announcement
16.
a)
The current setting plays. Press [1] to change the setting (enable or disable).
b)
Confirm the entry is correct and Press [2] to accept it.
17.
a)
The current setting plays. Press [1] to change the current number.
b)
Type the group number (1-17).
c)
Confirm the entry is correct and Press [2] to accept it.
Note
If set to "17 (Group 17)", the Intercom Paging feature is activated for all
groups (1-16).
18.
a)
The current setting plays. Press [1], [2], or [3] to change the desired mode.
• [1] System Prompt
• [2] User 1 Prompt
• [3] User 2 Prompt
b)
Confirm the entry is correct and Press [4] to accept it.
19.
a)
The current setting plays. Press [1] to change the setting (enable or disable).
b)
Confirm the entry is correct and Press [2] to accept it.
20.
a)
The current setting plays. Press [1] to change the setting (enable or disable).
b)
Confirm the entry is correct and Press [2] to accept it.
21.
a)
The current setting plays. Press [1] to change the current number.
b)
Type the number of Caller IDs (0-30).
c)
Confirm the entry is correct and Press [2] to accept it.