Filter
Top Products
A1 SYSTEM FEATURES
Installation Manual 197
Personal Greeting
for Caller ID
(DPT Integration
Only)
Permits subscribers to record up to 4
personal greetings for calls from pre-
assigned Caller ID numbers. Each greeting
supports up to 8 caller ID numbers.
This feature can be enabled or disabled in the
COS (Class of Service) settings.
• See 4.1 GUIDELINES FOR DPT
INTEGRATION.
• See "Personal Greeting Length"
and "Personal Greeting for CID"
in Table B-7 in B3 SYSTEM
ADMINISTRATION—SETTING
COS (CLASS OF SERVICE)
PARAMETERS.
• See C3 SETTING COS (CLASS
OF SERVICE) PARAMETERS.
• See "Personal Greeting for
Caller ID" in GLOSSARY.
• See 4.10 Recording Personal
Greetings for Caller ID in the
Subscriber’s Guide.
• See 4.11 Assigning Caller ID
Numbers for Personal Greeting
for Caller ID in the Subscriber’s
Guide.
Personal Greetings Permit the subscriber to record the following
3 personal message greetings:
No Answer—Plays when unavailable to
answer the call during business hours.
Busy Signal—Plays whenever the line is
busy.
After Hours—Plays when the VPS is in the
Night Mode.
The No Answer Greeting will also play:
• when the caller accesses the mailbox
directly.
• when the Busy Signal or the After Hours
Greeting has not been recorded.
• See 6.2.1 Recording Personal
Greetings.
• See "Personal Greeting Length"
in Table B-7 in B3 SYSTEM
ADMINISTRATION—SETTING
COS (CLASS OF SERVICE)
PARAMETERS.
• See C3 SETTING COS (CLASS
OF SERVICE) PARAMETERS.
• See "Personal Greetings" in
GLOSSARY.
• See 1.2 Recording Personal
Greetings in the Subscriber’s
Guide.
Play System Prompt
After Personal
Greeting
Allows the "Guidance for Recording"
message to be played for the caller after the
"Personal Greeting". The "Guidance for
Recording" message instructs the caller how
to terminate the call, access more features,
and re-record the message.
• See "Play System Prompt after
Personal Greeting" in Table B-7
in B3 SYSTEM
ADMINISTRATION—SETTING
COS (CLASS OF SERVICE)
PARAMETERS.
• See C3 SETTING COS (CLASS
OF SERVICE) PARAMETERS.
Table A-1
FEATURE DESCRIPTION REFERENCES