Panasonic KX-TVP200 Answering Machine User Manual


 
B3 SYSTEM ADMINISTRATION—SETTING COS (CLASS OF SERVICE) PARAMETERS
Installation Manual 217
Table B-7
Parameter Value Range
(Default)
Description/Function
Personal
Greeting
Length
8-60 s in 4 s
increments
(16)
Defines the maximum length of the personal greeting
message that can be recorded by the subscriber.
This parameter applies to:
Personal greeting on No Answer
Personal greeting on Busy
Personal greeting for After Hours
Personal greeting for Caller ID
New Message
Retention Time
1-30 days
(14)
Defines the number of days that an unplayed message
will remain in the mailbox. The storage period begins the
day after the message reception.
Saved
Message
Retention Time
1-30 days
0: Unlimited
(5)
Defines the number of days that a played message will
remain in the mailbox. The timing is "refreshed"
whenever the message is played back. If "0: Unlimited"
is selected, the saved message will remain in the
mailbox until erased by the subscriber.
Message
Length
1-6 min
0: Unlimited
(3)
Defines the maximum message length.
If set to "0: Unlimited", a subscriber can record two-way
conversations of unlimited length into his or another
persons mailbox (Two-Way Recording or Two-Way
Transfer). The maximum recording time for other
messages will automatically be set to 6 min.
Mailbox
Capacity
Maximum
Messages
5-100 msgs
(10)
Specifies the maximum number of (both new and saved)
messages that can be stored in a mailbox.
Mailbox
Capacity
Maximum
Message
Time
5-100 min
0: Unlimited
(10)
Specifies the total number of available minutes for
storing (both new and saved) messages in each
mailbox.
Message
Retrieval
Order
1. LIFO
2. FIFO
(LIFO)
Specifies the order in which messages will be retrieved
(played back for listening).
1. LIFOMessages are retrieved starting with the most
recent.
2. FIFOMessages are retrieved starting with the
oldest.
Message
Scanning with
Information
1. Yes
2. No
(No)
If set to "Yes", the VPS adds the message senders
name and the recording date and time to the message
during the message scan.