Filter
Top Products
2.6 INSTALLING PORT EXPANSION CARDS: KX-TVP102 OR KX-TVP204
Installation Manual 39
2.6 INSTALLING PORT EXPANSION CARDS:
KX-TVP102 OR KX-TVP204
2.6.1 General
Port Expansion Cards
• One KX-TVP102 card can support 2 VPS ports, under either Inband or DPT Integration.
• One KX-TVP204 card can support 4 VPS ports, under DPT Integration.
Expansion Capabilities of the VPS
The VPS can handle up to 12 ports simultaneously when 3 KX-TVP204 port cards are
installed.
The VPS has no port expansion card installed at the factory—the cards must be purchased
separately.
CAUTION
Before installing an optional port card, it is very important that the power to the unit
be turned off. Before beginning the actual installation and touching the card or any
circuitry within the unit, discharge any static electricity from your body by touching
the earthing strap. This is a critical step that must be performed to protect the printed
circuit board and any other electronic components from static electricity. Refer to
the manual accompanying the optional card concerning the precautions that must
be taken and the steps for completing the installation.
2.6.2 Installing the KX-TVP102 or KX-TVP204 Port Card
1.
Remove the adhesive tape from the card.
KX-TVP102 Card KX-TVP204 Card