Filter
Top Products
B6 SYSTEM ADMINISTRATION—SYSTEM PARAMETER SETTINGS
Installation Manual 249
Date DD/MM-DD/MM
or
DD/MM
(DD: Day
MM: Month)
(None)
Specifies the day or the range of days on which to
enable Holiday Service setting.
• If you want to set a single day as a holiday, specify
only one date.
• If you want to set a range of days as holidays,
specify both the start and the end dates of the
range.
Note: Holidays cannot overlap.
Retain Holiday 1. Yes
2. No
(No)
Stores the Holiday Service setting for future use. If set
to "Yes", the same setting will be activated
automatically on the same day every year. If set to
"No", the setting will be cancelled automatically after
the holiday is over.
Service 1. Voice Mail
2. Auto. Attn.
3. Interview
4. Custom
(Auto. Attn.)
Specifies one of 4 incoming call services for the
holiday.
Note: When Interview Service is specified, one of
Subscriber’s Interview Mailbox numbers should also
be specified. When the Custom Service is specified,
one of Custom Service numbers (1-100) should also
be specified.
Company
Greeting No.
1-32
S: System Greeting
N: None
(S: System
Greeting)
Specifies the Company Greeting to be played on the
holiday.
The System Greeting is: "Good Morning/Afternoon/
Evening. Welcome to the Voice Processing System".
(However, the Message Manager can change this.)
Port Affected Port No.
(1-12)
Specifies the port number on which the Holiday
Service setting is activated. The unspecified ports
provide the usual incoming call service.
Note: Pressing [(back space)] will clear the parameter.
The maximum number of ports depends on the VPS
model.
Trunk Affected Trunk No.
(1-48)
Specifies the trunk (outside line) number on which the
Holiday Service setting is activated. The unspecified
trunks (outside lines) provide the usual incoming call
service.
Note: Pressing [(back space)] will clear the parameter.
Table B-24
Parameter Value Range
(Default)
Description/Function