Filter
Top Products
4.2 KX-TD500 PROGRAMMING FOR DIGITAL INTEGRATION
Installation Manual 81
Screen output:
4.
Assignment of the extension ports connected to the VPS
a)
Continue the programming in the "1-4 VPS (DPT) Port Assignment" screen.
b)
Select the extension port number of the card (DLC/DHLC) to which the VPS (DPT) jack
is to be connected in the "Port No." menu.
Notes:
• You can assign a maximum of 6 jacks (12 ports) with the KX-TD500.
• This menu is displayed only when the attribute of the ports is assigned to
"VPS (DPT)" in step 2.
• This programme tells the KX-TD500 which extension ports are connected to
the VPS. This allows the KX-TD500 to send the proper Digital Integration
information to these ports.
• Jack No.1 must be assigned, because its port is used as the channel to
control the VPS.
c)
Assign "DN" for the port (click "DN Refer" to check the available directory numbers).
Note:
This programme allows you to assign an extension number to each Voice Mail
port. Since each port connected to the VPS provides two extensions, this
enables you to assign extension numbers to each port. To reach the Voice Mail
system, users dial these extension numbers.
d)
Assign "Extension Group No." for the port.
Note:
Specify the extension group number (126 or 127 by default) to which VM or AA
is assigned. Group numbers 1 to 128 are available to the VPS through
additional programming.
(Selecting VM has the same effect as selecting AA, regardless of how the VPS
is programmed.)