Filter
Top Products
4.3 CONNECTING THE VPS WITH THE PANASONIC KX-TD816, KX-TD1232 AND KX-TD612
86 Installation Manual
4.3 CONNECTING THE VPS WITH THE
PANASONIC KX-TD816, KX-TD1232 AND
KX-TD612
Notes
• Do not use System Programmes [106], [131], [602] or [813] for DPT Integration.
• The next 2 sections (4.3.1 KX-TD1232 Software Verification and Programming for DPT
Integration via the Manager’s Extension and 4.3.2 KX-TD1232 Software Verification
and Programming for DPT Integration via the Operating and Maintenance Tool) are for
the KX-TD1232 as examples. Please refer to them for the KX-TD816 and the KX-
TD612.
4.3.1 KX-TD1232 Software Verification and Programming for
DPT Integration via the Manager’s Extension
It is important that the KX-TD1232 has the proper software level to allow DPT Integration with
the VPS. Follow the procedures below to confirm the software level, then complete the
required programming before starting up the VPS.
Note
Two methods of programming are available on the KX-TD1232. The instructions
below show how to program without the operating and maintenance tool. For
instructions on programming with the operating and maintenance tool, please see
4.3.2 KX-TD1232 Software Verification and Programming for DPT Integration via the
Operating and Maintenance Tool.
All of the following procedures must be done after entering system programming. Refer
to the KX-TD1232 Programming Guide or Installation Manual for instructions on how to
enter the system programming mode.
Software Verification
1.
Verify Software–If you are configuring a 2-cabinet system, remember to check both
cabinets. The software must be the same in each. Check the software version of the KX-
TD1232 using System Programme [116].
Example: P111GYMMDD
A
The underlined digits represent the software production date code (year, month, day).
If the software version of the PBX is old, you may not be able to utilise some of the
features available only with DPT Integration. For more information, consult your
dealer.
From the SYS-PGM NO ? screen:
a)
Enter [116].
b)
Press the NEXT button (SP-PHONE).