Filter
Top Products
B7 SYSTEM ADMINISTRATION—HARDWARE SETTINGS
266 Installation Manual
Dialing Parameters
These parameters specify how the VPS will initiate and control call transfers, setup outgoing
calls, and control message waiting lamps on extensions. The procedure for verifying the
correct code sequences for non-Panasonic KX-T series telephone systems is to manually
execute the sequences from a single line telephone (SLT) with the PBX.
To access the proper menu for PBX Interface Parameters, follow the menu path as
shown:
System Administration Top Menu-1-6-3
To access the proper menu for Dialing Parameters, follow the menu path as shown:
System Administration Top Menu-1-6-3-1
Table B-39
Parameter Value Range
(Default)
Description/Function
PBX Type 1. Other Manufacturers
2. KX-T Series
1. T308
2. T616
3. T1232/TA series
4. T96
5. T336
6. TD816
7. TD1232
8. TD500
9. Reserved
Specifies the type of PBX connected to the VPS. In
the case of a Panasonic KX-T series telephone
system, the model number should also be specified.
Note: The Dialing Parameters are set automatically
to each PBX default value after selecting the PBX
type except when setting "Other Manufacturers".
(Other Manufacturers)
Table B-40
PBX Type
Other
Manu-
facturers
KX-T series
T308 T616
T1232/
TA
series
T96 T336
TD816/1232
TD612
TD500
Integration
Mode
None
Inband Inband
None
Inband Inband Inband *DPT Inband *DPT
Inband Inband
Operator
Transfer
Sequence
FX FTX FTX FTX FTX FTX FTX FX FTX FX