Filter
Top Products
B7 SYSTEM ADMINISTRATION—HARDWARE SETTINGS
264 Installation Manual
B7 SYSTEM ADMINISTRATION—HARDWARE
SETTINGS
For System Administration (system setup, mailbox setup, and system diagnosis), an RS-232C
terminal must be connected to the serial interface of the VPS.
B7.1 RS-232C Parameters
To access the proper menu for Hardware Setting, follow the menu path as shown:
System Administration Top Menu-1-6
To access the proper menu for RS-232C Parameter, follow the menu path as
shown:
System Administration Top Menu-1-6-1
Table B-37
Parameter Value Range
(Default)
Description/Function
Baud Rate 1. 300 bps
2. 600 bps
3. 1200 bps
4. 2400 bps
5. 4800 bps
6. 9600 bps
7. 19200 bps
8. 38400 bps
(9600)
Specifies the speed at which the data is transferred in
bits per second.
Word Bit
Length
1. 7 bits
2. 8 bits
(8 bits)
Defines the number of bits in each byte or character.
Parity 1. None
2. Odd
3. Even
(None)
Specifies the parity to use for error detection.
Stop Bit Length 1. 1 bit
2. 2 bits
(1 bit)
Specifies the number of bits used to signify the end of
the byte.