Filter
Top Products
B6 SYSTEM ADMINISTRATION—SYSTEM PARAMETER SETTINGS
258 Installation Manual
Other Parameters-External Message Delivery
Controls the handling of External Message Delivery calls.
System
Callback No.
Up to 32 digits
(None)
Specifies a telephone number that will display on the
subscriber’s beeper (pager) as a callback number. The
callback number entry mode "X" must be included in the
telephone number.
Note: If "Beeper Callback No. Entry Mode" is enabled
through COS, the callback number entered by the caller
will display on the destination beeper (pager). However,
if the caller fails to enter a callback number, the System
Callback No. will display instead.
To access the proper menu for External Message Delivery, follow the menu path as
shown:
System Administration Top Menu-1-5-7-4
Table B-31
Parameter Value Range
(Default)
Description/Function
Retry Times 0-4 times
(3)
Specifies the number of times to attempt an external
message delivery call when the destination is busy or if
there is no answer.
Busy Delay 2-60 min
(3)
Specifies the length of time in minutes the VPS must wait
after a busy condition is received before trying to deliver
the message again.
No Answer
Delay
2-120 min
(60)
Specifies the length of time in minutes the VPS is to wait
after a no answer condition is received before trying to
deliver the message again.
Outgoing Call
Ports
Port No.
(1-12)
Specifies the port numbers used for the External Message
Delivery feature.
Message
Length
1-6 min
(3)
Specifies the allowable message length of external
delivery messages that the subscriber can record.
Max.
Messages for
Mailboxes
1-100 msgs
(3)
Specifies the maximum number of external delivery
messages that can be stored in 1 mailbox.
Table B-30
Parameter Value Range
(Default)
Description/Function